The cutting system is an important part of the structure of the trash bag making machine. The system is mainly composed of a cutter, a length adjuster, an overrunning clutch and a wire bonding adjustment. Among them, the cutter is the most important part of the system. It is a floating mechanism that is pressed by a spring and a sliding guide. The upper and lower knives can be adjusted. The adjustment screw can be used to adjust the tightness of the cutter, which can well exclude the difficulty of cutting raw materials.
At the same time, during the operation of the garbage bag manufacturing machine, the length of the bag can be adjusted by means of the bag length adjuster, generally by adjusting the bag size by tightening the hand wheel and the nut. The overrunning clutch is an important part of the machine. Its quality and performance directly affect the error of the product length. However, in the course of use, due to the high working frequency, its life has a certain limit.
In addition, the automatic light control feeding device has a very important influence on the performance of the garbage bag manufacturing machine. This part is composed of servo motor, feeding rubber roller, light control louver, blind, photoelectric tracking machine and electric control line. Its function is to keep the film feeding normally during the production process. When the machine is running, when the film feeding speed is too fast to cover the light control rays, the device will issue a command to stop the motor from rotating and feeding.
Related Industry Knowledge
- Inspection of coextrusion film blowing machine
- Performance of film Blowing machine
- Characteristics of film Blowing machine
- Type of film Blowing machine
- The use method of film blowing machine
- The attention of film blowing machine
- Brief introduction of Slitting machine
- Equipment characteristics of Slitting machine
- Operation Requirements for slitting machines
- Development direction of Slitting machine
- The structure and main control method of ffully...
- Bottom seal bag making machine is a good choice...
- What are the characteristics of Plastic Sheet C...
- Introduction of the function of the cutting sys...
- BOPP bag making machine use and configuration