Tel: +86-13921366778


Home > Knowledge > Content
How to adjust the plastic film slitting machine
- Jul 25, 2018 -

The plastic film slitting machine has a simple and wide application range, and is mainly used for slitting polyester film, aluminized film, BOPP LDPE, HDPE, LLDPE, PP and the like. Plastic film slitting machines can also cut mica tape and PE into different sizes, so the device has been widely used in packaging and other laminating industries.


In actual operation, in order to exert the good performance of the machine, it is necessary to make reasonable adjustments. First, when adjusting the paper feeding belt, the plastic film slitter should be aligned with the punched side of the coated paper roll. Usually, according to the size of the paper to be cut, adjust the hand surface of the operation surface so that the distance between the two sets of pressure rollers is appropriate. Install the slanting wheel to the punched side of the coated roll and adjust the angle.


Secondly, it is necessary to adjust the delivery baffle of the plastic film slitting machine to the required distance, load the perforated coated paper roll into the feeder, and pass the paper through the first rubber roller for the paper shaft. Press and adjust, adjust the plastic film slitter roller to adjust the handwheel to the appropriate pressure, and then turn on the electric appliance to adjust the speed from slow to fast, and use the speed difference between the fast and slow rollers to separate the coated paper.