Tel: +86-13921366778

E-mail: beiguopack@gmail.com

Home > Knowledge > Content
Precautions for installation and use of garbage bag making machine
- Nov 20, 2018 -

The garbage bag making machine is the main equipment for making plastic garbage bags. It is to melt and melt the plastic particles and then blow them into a film. The new particles are blown out with new particles. The color is called clean, and the bag is stretched well. When installing the equipment, care should be taken to adjust the center line of the extruder head to be horizontal and vertical with the center of the traction roller, and must not deviate from the skew. When winding up, the outer diameter of the winding is gradually increased. Please pay attention to the matching between the pulling speed and the winding speed. Please adjust it in time.

 

After the garbage bag manufacturing machine is turned on, pay close attention to the operation of the host, adjust, correct, and adjust the electrical instrument and controller in time to ensure its normal operation. The main gear box and the traction reducer should be refueled frequently, and the gear oil should be replaced to ensure the normal operation of each rotating part; the compressed air in the bubble tube should be kept at an appropriate amount.

 

In order to ensure the normal use of the garbage bag making machine and the quality of the product, the equipment shall not start the extruder and the rotary die without heating, heating temperature and time less than the specified requirements; only copper may be used for the die and die cleaning. The film can be used to clean the die, and the blade should not be scraped with a blade or iron.

 

In addition, the filter and corona treatment machine of the extruder for the garbage bag making machine must be regularly replaced for filtration and cleaning. Generally, the filter must be replaced within 24 hours to 48 hours, and the silica gel of the corona treatment machine must be cleaned with alcohol. Roller. Filter specifications: a two-layer 80 mesh, one-layer 100-mesh three-layer filter.

 

http://www.beiguomachine.com/