Tel: +86-13921366778


Home > Knowledge > Content
Structural composition and operation requirements of winding machines for condenser bushings
- Jul 28, 2018 -

The winding machines for condenser bushings is mainly composed of three parts, namely a mechanical part, a pneumatic part and an electric part. When installing, it is important to ensure that the machine is reliably installed on a level surface and that sufficient operating space is reserved. At the time of installation, also pay attention to the good installation of each fastener, confirm that the condenser casing winder can work normally.


Generally, in the structure of the winding machines for condenser bushings, the main components of the mechanical part include: main shaft, detent tire device, guiding device, discharging rack, feeding mechanism, robot, tensioning device, argon arc welding machine and The welding device and the brake mechanism are composed of nine parts. The core of the mechanical part is the sway of the main shaft, and reducing the sway is one of the important reasons for maintaining the flatness of the end face.


In order to ensure safe production, an emergency switch should be set in the discharge rack of the condenser casing winder and the main machine, in case of urgent need, any operation of the emergency switch can make the winder stop, so as not to give the winder Cause unnecessary damage. At the same time, it should be noted that good grounding measures are one of the important measures to ensure personal safety.