Tel: +86-13921366778


Home > Knowledge > Content
The process of using the plastic bag manufacturing machine
- Aug 22, 2018 -

Before the plastic bag manufacturing machine is turned on, the staff needs to check for dust and debris around the equipment and clean it up. Then, according to the production notice, the film roll is required, and the size of the bag is adjusted according to the process requirements. The heat sealing knife of the plastic bag making machine is installed, and the position of the slitting knife and the heat sealing knife are initially adjusted.


Next, you can turn on the power, and set the heat seal temperature of the plastic bag manufacturing machine according to the process requirements, input the relevant data of the bag making and the required quantity per tie. It is recommended to adjust the sensitivity of the light eye to the left and right of the pattern edge with a large color difference to meet the requirements.


Nowadays, with the improvement of the technical level, the performance and function of the plastic bag manufacturing machine have been gradually enhanced, so it is also convenient to use. After the production task is completed, the equipment should be shut down in time, the power supply should be cut off, and the quality of the finished product should be inspected. Then clean the work site, inspect and maintain the plastic bag making machine, and prepare for the next normal use.